a class ring
Moderator: ToddMichael
a class ring
I'm selling waxes for your own class ring ...guys if you need one let me know (just kidding)
here's one I made using orzels 5min. cls ring tut (with a little modifications) for the lower half and sergios tut (with some modifications)
for the top
here's one I made using orzels 5min. cls ring tut (with a little modifications) for the lower half and sergios tut (with some modifications)
for the top
- Attachments
-
- cls ring.jpg (42.7 KiB) Viewed 6185 times
-
- cls 1 ring.jpg (44.8 KiB) Viewed 6185 times
-
- cls 2 ring.jpg (70.08 KiB) Viewed 6185 times
- jeff dunnington
- Site Admin
- Posts: 1622
- Joined: Tue Feb 24, 2004 1:24 pm
- Location: Houston, Tx
- Contact:
class ring wax
here's one I did for practice using a combination orzels 5min tut,sergios (from artc miami) and my techniques.. still could use some tweeking!
but all in all looks pretty good!
but all in all looks pretty good!
- Attachments
-
- DSCN2938.jpg (26.4 KiB) Viewed 6117 times
-
- DSCN2937.jpg (27.81 KiB) Viewed 6117 times
-
- DSCN2936.jpg (30.02 KiB) Viewed 6117 times
stone in cls ring
here is the original design before I changed the angle for the letters on the previous one I posted ,.. two hrs to mill and I used a old brokin bit! I tried this to see if it would mill at this angle ...came out good! I milled it with the stone design left in on purpose this can be milled on the 15 here is the file if anyone wants to try it (jeff you asked)
- Attachments
-
- stone in cls ring.zip
- (1.39 MiB) Downloaded 606 times
-
- DSCN2940.jpg (25.35 KiB) Viewed 6088 times
-
- DSCN2939.jpg (29.54 KiB) Viewed 6088 times