my pen
Moderator: ToddMichael
my pen
I know I milled it on the mdx40 but I thought you guys might like to see anyway...
- Attachments
-
- done pen.JPG (205.84 KiB) Viewed 13666 times
rhino4 and 5, rhino gold, hypershot, vector magic, next engine, cadwax ring builder, tsplines
hey toddy
add two cups of coffee, 4 slices of bacon, two fried eggs, fried potatoes with sausage gravy over them, two slices of buttered toast and milling in alum. feeling your heart beat everytime it makes a deep cut hoping (fingers crossed) that the bit don't break and you got yourself a real 'widow' maker...
add two cups of coffee, 4 slices of bacon, two fried eggs, fried potatoes with sausage gravy over them, two slices of buttered toast and milling in alum. feeling your heart beat everytime it makes a deep cut hoping (fingers crossed) that the bit don't break and you got yourself a real 'widow' maker...
rhino4 and 5, rhino gold, hypershot, vector magic, next engine, cadwax ring builder, tsplines
- ToddMichael
- Posts: 623
- Joined: Sat Jun 21, 2008 11:36 am
- Location: Detroit, MI
- Contact:
fun for now, but now the fun is over...I'm getting some new bits so I might try another one...
ran it with a 1mm ball, at apx 9000 rpm, at 60 mm per min, apx .4mm cut in, took 8 hours..so now you see what I mean about a 'widow' maker ..after 5-7 hrs you just keep praying the bit don't break...I took off the depth stopper on the bit so I couldn't change the bit if I had to.... next time I'll leave the stopper on and grab another bit as needed
ran it with a 1mm ball, at apx 9000 rpm, at 60 mm per min, apx .4mm cut in, took 8 hours..so now you see what I mean about a 'widow' maker ..after 5-7 hrs you just keep praying the bit don't break...I took off the depth stopper on the bit so I couldn't change the bit if I had to.... next time I'll leave the stopper on and grab another bit as needed
rhino4 and 5, rhino gold, hypershot, vector magic, next engine, cadwax ring builder, tsplines
hey toddy, got my new bit in (I just ordered a flat end mill also) the one on the right is the new bit... it is supposed to be alot stronger then the other.... that one I got at harbor freight in the 'set' I think I'll like the new bit for milling metal...should be able to go faster!
- Attachments
-
- 100_3609.JPG (109.15 KiB) Viewed 13658 times
rhino4 and 5, rhino gold, hypershot, vector magic, next engine, cadwax ring builder, tsplines
- ToddMichael
- Posts: 623
- Joined: Sat Jun 21, 2008 11:36 am
- Location: Detroit, MI
- Contact:
Cool, I am trying out the bits I got on Ebay tonight, since I have 97 of them, I am hoping its not going to be lets see how many I can break before I get it right, night.
I need stock in Bits and Bits. I think I found their supplier by mistake, but a minimum order per size and style was 144, but they were like $10.00 opposed to $30.
Got it brewing in the back of my head, and becoming a milling tool supplier, then I wake up again.
TM
I need stock in Bits and Bits. I think I found their supplier by mistake, but a minimum order per size and style was 144, but they were like $10.00 opposed to $30.
Got it brewing in the back of my head, and becoming a milling tool supplier, then I wake up again.
TM
- ToddMichael
- Posts: 623
- Joined: Sat Jun 21, 2008 11:36 am
- Location: Detroit, MI
- Contact:
- ToddMichael
- Posts: 623
- Joined: Sat Jun 21, 2008 11:36 am
- Location: Detroit, MI
- Contact:
I go through one every few months or so, but I don a lot of milling.
I still mill at least every day, I was looking at my job box, and I have 11 to mill for customers.
3 for stock.
and working on a line of new jewelry that has 40 plus pieces in it, I am
doing at home. So I do one every other night when I can.
I use those tapers for 50% of all my milling. the end mills I bough from Ebay are .5mm, with a 6.5 mm draft. I use those for almost everything else.
Todd Michael
I still mill at least every day, I was looking at my job box, and I have 11 to mill for customers.
3 for stock.
and working on a line of new jewelry that has 40 plus pieces in it, I am
doing at home. So I do one every other night when I can.
I use those tapers for 50% of all my milling. the end mills I bough from Ebay are .5mm, with a 6.5 mm draft. I use those for almost everything else.
Todd Michael
here's a picture of the finished milling part I did this with the 1mm ball end mill took apx 3 hrs I'll try picking it up a little ..as soon as I get some flat stock I'll try something on the 15...
- Attachments
-
- 100_3613.JPG (238.17 KiB) Viewed 13627 times
rhino4 and 5, rhino gold, hypershot, vector magic, next engine, cadwax ring builder, tsplines
- martin james
- Posts: 278
- Joined: Thu Mar 03, 2005 11:00 am
- Location: Colorado
Hi Pat,
The fisher spacepen company makes pen refills that do not fail. Freeze proof, heat proof space proof, write underwater etc
they only cost $5
I used to use zebra refills on my custom pen, and I can tell you that it is very annoying to pull out the custom, get people interested and then have the ink stop or worse leak..
http://www.spacepen.com/cartridge.aspx
cheers M
The fisher spacepen company makes pen refills that do not fail. Freeze proof, heat proof space proof, write underwater etc
they only cost $5
I used to use zebra refills on my custom pen, and I can tell you that it is very annoying to pull out the custom, get people interested and then have the ink stop or worse leak..
http://www.spacepen.com/cartridge.aspx
cheers M