latest project
Moderator: ToddMichael
-
- Posts: 49
- Joined: Sat Nov 05, 2005 1:39 pm
- Location: Comstock Park, Michigan
- Contact:
latest project
Finally had a little time to post a project. Model drawn in Rhino, my pictures does not show it, but we put 4 sentences of script on the inside. Turned very well. I should mention the model was grown.
- Attachments
-
- DSC03927.JPG (250.38 KiB) Viewed 9044 times
-
- bell custom grand master top1.jpg (15.39 KiB) Viewed 9044 times
-
- Posts: 49
- Joined: Sat Nov 05, 2005 1:39 pm
- Location: Comstock Park, Michigan
- Contact:
-
- Posts: 49
- Joined: Sat Nov 05, 2005 1:39 pm
- Location: Comstock Park, Michigan
- Contact:
-
- Posts: 49
- Joined: Sat Nov 05, 2005 1:39 pm
- Location: Comstock Park, Michigan
- Contact:
-
- Posts: 49
- Joined: Sat Nov 05, 2005 1:39 pm
- Location: Comstock Park, Michigan
- Contact:
-
- Posts: 49
- Joined: Sat Nov 05, 2005 1:39 pm
- Location: Comstock Park, Michigan
- Contact:
-
- Posts: 49
- Joined: Sat Nov 05, 2005 1:39 pm
- Location: Comstock Park, Michigan
- Contact:
Thanks. Depending on how well your castings turn out, I would say very comparible. Almost all of the models I have grown so far have been grown in .003 resolution. I have been very happy with the quality. After milling a model, sometimes I would take a nylon and rub the wax to obtain almost a polished wax surface. Of course, depending on the detail you can't always do that. If that becomes a concern, I can bump it up to .001 resolution to obtain the highest quality when needed. That would add to the growing time. Can hardly wait to see your design, email me the .stl and I will grow it for you.
Richard
Richard
- martin james
- Posts: 278
- Joined: Thu Mar 03, 2005 11:00 am
- Location: Colorado
grown
Hi Richard, Are growing via a rapid prototype machine? If so which machine.. Thanks Marty
-
- Posts: 49
- Joined: Sat Nov 05, 2005 1:39 pm
- Location: Comstock Park, Michigan
- Contact: