THE 3DWAXMILLER CLUB. Forum Index THE 3DWAXMILLER CLUB.
A place to share your experiences with your 3dwaxmill system. 3D Wax Mill
 
 AlbumAlbum FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 


 The 3dwaxmiller Club Forum Highlights
Check this page often for new and important post.

   The 3dwaxmiller Club Gallery
See Jewelry, Waxes and other project designed and created by our members with the 3dwaxmill.


The 3dwaxmillers Club Gallery Click each picture to enlarge
Moderators: None
Goto page Previous  1, 2, 3 ... , 21, 22, 23  Next
Upload Pic
Category :: The 3dwaxmillers Club Gallery Click each picture to enlarge
Milled the top with the bezel for the princess cut diamond then hand carved a base to match. Waxed together and cast as one piece.  Cast in 14k YG
Milled 1 piece, cast in 14k white gold. The diamond has a tube under it for support. Cut the opening on the sides for the chain by hand. Very easy project.
Simple design. Milled the top with the bezel including all of the holes for the bead work. The milled the base under and waxed together. cast as 1 piece.
Customer had a very deep trillion cut tanz. Vary odd size. Milled the head and shank coming out of the head then attached to a wax shank I carved then cast as one piece. Baguette channels roughed in the wax. Side bead work was don after it was cast and bags. were set.
This is what you do for a divorce, you take the parts and make them not look like an engagement ring.  I milled this over a ring tube. First milled the piece as 1 then made a copy of just the yellow part. Cast all white and the yellow heads then cut the white heads away. Yellow fit like a glove.
Mill the center initial plate and border. Hand carved the shank
Pic Title: Horseshoe Ring
Poster: JewelryDoctor
Posted: Mon Jan 17, 2005 8:17 pm
View: 230
Comments: 0
Pic Title: Dia Slide.
Poster: JewelryDoctor
Posted: Mon Jan 17, 2005 8:07 pm
View: 200
Comments: 1
Pic Title: Blue topaz Rg.
Poster: JewelryDoctor
Posted: Mon Jan 17, 2005 8:03 pm
View: 222
Comments: 1
Pic Title: Tanzanite and Diamond
Poster: JewelryDoctor
Posted: Mon Jan 17, 2005 8:00 pm
View: 241
Comments: 1
Pic Title: TT Bypass Rg.
Poster: JewelryDoctor
Posted: Mon Jan 17, 2005 7:43 pm
View: 202
Comments: 1
Pic Title: Two tone signet
Poster: jeff dunnington
Posted: Mon Jan 17, 2005 2:24 am
View: 193
Comments: 0
Here is a bezel that I needed larger.  I scanned it with Dr. Picza and resize and changed the center setting.
4.60 carat TW Tourmaline pear shapes.  The 2.16 ct tw Diamond Door knocker hoops can be detached.  18k Yellow gold.  Designed and milled everything from 3dengrave.   This set was to match a ring that I had made the customer last Christmas.
Customer had a pear diamond approx. .30 ct. She wanted to move it from her finger to another part of her anatomy. Needed a bezel to go around stone milled that part and made the wire from 14 gauge that I drew out. Wire is secured into dimples made on the side.
Bought these rubies for customer who then wanted a pendent and ER set. Stones were odd sizes. Milled all of these pieces including the hinge system. Did have to drill holes for Pave' by hand. The only soldering I did was to secure the hinge rings and the posts on the ERs
Simple signet style ring. Created top with mill and matched a base to it.
The mounting is 14kYG with WG plate. All of the pieces were milled. The base was milled over a ring tube. The plate was milled with the 3 beads in the corners. Simple clean up with a graving tool. The plate and base were perfit fits.
Pic Title: Scan and resize
Poster: jeff dunnington
Posted: Mon Jan 17, 2005 2:20 am
View: 595
Comments: 0
Pic Title: Tourmaline and diamond earrings
Poster: jeff dunnington
Posted: Thu Dec 30, 2004 11:15 pm
View: 261
Comments: 2
Pic Title: Body Ring
Poster: JewelryDoctor
Posted: Tue Dec 28, 2004 9:44 am
View: 206
Comments: 1
Pic Title: Ruby Set
Poster: JewelryDoctor
Posted: Tue Dec 28, 2004 9:39 am
View: 196
Comments: 0
Pic Title: SS Signet
Poster: JewelryDoctor
Posted: Tue Dec 28, 2004 9:35 am
View: 207
Comments: 0
Pic Title: Man's Ring.
Poster: JewelryDoctor
Posted: Tue Dec 28, 2004 9:33 am
View: 194
Comments: 0
14k WG with 5 .10 ct. hearts of fire diamonds. The mounting was milled as seperate pieces; 5 bands 5 heads. Bands were notched so the heads would fit into them.  Soldered bands together.
3 pink sapp 4mm each and 28 .01 ct diamonds. Milled the top plate and then milled the gallery over a ring tube. All holes were drilled with the mill. Bead work was done by hand.
Customer had here Dad's Lowes Co. ring and wanted a piece with the diamonds and the blue clasring style stone in the center. Milled over a ring tube. Had to cut the channel into it by hand.
14k WG with 6m yellow sapphire in the center and .03 ct stones around. .07 ct diamonds in the arms. The front and back were milled as well as the center cluster plate. Holowing was done in wax by hand and welded the halves together after cast. The bail was handmade.


Pic Title: Righthand Ring
Poster: JewelryDoctor
Posted: Tue Dec 28, 2004 9:28 am
View: 217
Comments: 1
Pic Title: Pink Sapphire Rg
Poster: JewelryDoctor
Posted: Mon Dec 27, 2004 4:46 pm
View: 221
Comments: 0
Pic Title: Award Stone Rg
Poster: JewelryDoctor
Posted: Mon Dec 27, 2004 4:41 pm
View: 173
Comments: 0
Pic Title: Maltise Cross
Poster: JewelryDoctor
Posted: Mon Dec 27, 2004 4:35 pm
View: 235
Comments: 1
Pic Title: Drusy Onyx set in 14k White Gold
Poster: jeff dunnington
Posted: Mon Dec 20, 2004 11:14 pm
View: 244
Comments: 0
Pic Title: Emerald Cut Diamond 6 Baguettes
Poster: jeff dunnington
Posted: Mon Dec 20, 2004 8:27 pm
View: 230
Comments: 0
1.690 ct Emerald Cut Lavender Sapphire and diamonds
Designed in 3dengrave mill in 3dengrave
Amber pendand designed in 3dengrave 30 minute design time
2 hrs milling and ready to cast
Customer had 10 single cut diamond, wanted diamonds added and wide heart pin made.  No Problem :)
Customer had a light weight diamond band and wanted something to accent. Milled as 3 pieces. The top and the 2 sides. After casting; assembled and set 9 .03 ct diamonds. Cast in 14k WG Dia band shown is customers
Ring was milled from the profile. Had to drill holes by hand and split area between prongs. Set with 37, .025 ct dia. Cast in 14k WG
This was milled as 1 piece over a ring tube. Customers gold and diamonds. Shank was altered after milling to give the current shape.
Pic Title: Emerald cut Lavender Sapphire & diamond ring
Poster: jeff dunnington
Posted: Mon Dec 20, 2004 5:28 pm
View: 285
Comments: 0
Pic Title: Amber Pend
Poster: jeff dunnington
Posted: Sun Dec 19, 2004 12:03 pm
View: 268
Comments: 0
Pic Title: Diamond Heart Pin
Poster: jeff dunnington
Posted: Fri Dec 17, 2004 8:56 pm
View: 200
Comments: 0
Pic Title: Band Enhancer
Poster: JewelryDoctor
Posted: Tue Dec 07, 2004 6:50 pm
View: 216
Comments: 1
Pic Title: Dia Eternity Ring
Poster: JewelryDoctor
Posted: Tue Dec 07, 2004 6:46 pm
View: 259
Comments: 1
Pic Title: Dia Railroad Track
Poster: JewelryDoctor
Posted: Tue Dec 07, 2004 6:42 pm
View: 192
Comments: 0
Customers stones, milled bezel piece to fit and cast in 14k WG. The bail was made by hand and soldered.
This is a job I could have easily hand carved but I wanted to try it in 3dengrave. Did not take long to do the file and have made it availible in the 3dengrave forum.
14k YG signet rings. The tops were milled with the MDX and the bases were hand carved. Have since designed a file for milling the top half.
14k WG 8 x 6 Tanz. with .20 ct. rd dia.
14k YG charm w/ diamonds
14k TT with .05 ct. diamonds.
Pic Title: 3 Dia. Pend
Poster: JewelryDoctor
Posted: Tue Dec 07, 2004 6:38 pm
View: 189
Comments: 0
Pic Title: Sapphire and Pave
Poster: jeff dunnington
Posted: Wed Nov 24, 2004 5:59 pm
View: 245
Comments: 0
Pic Title: Monogram Signets
Poster: JewelryDoctor
Posted: Mon Nov 22, 2004 10:22 am
View: 242
Comments: 0
Pic Title: Tanzanite and Dia Pend.
Poster: JewelryDoctor
Posted: Mon Nov 22, 2004 10:14 am
View: 208
Comments: 0
Pic Title: LoveLetter
Poster: JewelryDoctor
Posted: Mon Nov 22, 2004 10:07 am
View: 201
Comments: 0
Pic Title: TT Wed Band
Poster: JewelryDoctor
Posted: Mon Nov 22, 2004 10:04 am
View: 214
Comments: 0
Select sort method:  Order:  
Upload Pic    THE 3DWAXMILLER CLUB. Forum Index -> Album -> The 3dwaxmillers Club Gallery Click each picture to enlarge All times are GMT - 6 Hours
Goto page Previous  1, 2, 3 ... , 21, 22, 23  Next
Page 22 of 23
Jump to:  

You cannot upload new pics in this category
You cannot post comments to pics in this category
You cannot edit your pics and comments in this category
You cannot delete your pics and comments in this category



Powered by phpBB © 2001, 2005 phpBB Group